COLMI C60 - Frequently Asked Questions

FREQUENTLY ASKED QUESTIONS FREQUENTLY ASKED QUESTIONS
1.The watch cannot be turned on
Please press and hold the power button for more than 3 seconds
or the battery may be low and need to be charged in time.
2.Bluetooth is not connected or cannot be connected
1) Please try to restart the watch and reconnect.
3.Hand measurement of heart rate / blood pressure /
blood oxygen / ECG is inaccurate
1) During general measurement, the sensor of the watch is not in
correct contact with the human body.
4.Sleep data is not accurate enough
Notice:
1) Sleep monitoring is the state of simulating people's self -
recognized time to fall asleep and wake up, and needs to wear
the device correctly.
2) If you wear it too late or when you fall asleep, there may be
errors.
3) Sleep data is not monitored during the day, and the default
sleep monitoring is from 9:30 pm to 12:00 noon the next day.
1) Do not charge in a humid and watery environment.
2) Please regularly clean the magnetic charging hole on the back
of the watch with a clean flannelette to ensure that the magnetic
charging hole of the watch fits the magnetic charger to ensure
normal charging.
3) This product is not equipped with a power adapter. In order to
ensure the safety of family members and property, you can use
the computer USB interface or choose a power adapter with an
output of no more than 5V……1A when charging. Please buy
power adapters through regular channels, and avoid using low -
quality, fake power adapters to avoid bursting or fire.
For more frequently asked questions, please check the App'' My' -
'>FAQ
When connected to a mobile phone, the device will
synchronize some data with the mobile phone
through Bluetooth in time, including weather,
notification messages, sports health data, etc. This
data will not be synced when the connection is
dropped or Bluetooth is turned off.
2) When measuring, please pay attention to the full contact
between the sensor and the wrist.
3) For people with darker skin and more arm hair, please turn on
''Enhanced measurement'' in ''Device'' ->Enhanced measurement
in the App.
2) Please try to connect again after restarting your phone's
Bluetooth.
3) Do not connect the phone to other Bluetooth devices at the
same time.