Layers List
Open the Layers List. Click a process name. Layers List displays the current layers
associated with a process. Set the rate, thickness, name, and order of the layers.
Add a layer. Click a process name
Select a layer. Single-click.
Edit layer name, rate, and thickness. Double-click a layer. Modify the name, rate,
and/or thickness. Click OK.
21
Chapter 3 Program Control
Renaming a process. Double-click a process in the Process Layers List.
Copy Layer. Select an existing layer and press Copy to produce a copy in the list.
Change order of layers. On the Layers List click and hold a layer, drag the layer up or
down the list, and release the layer where desired.
Remove Layer. On the Layers List click and hold a layer, drag the layer up or down the
list, and release the layer where desired.
To Next Page
Loading...