Colnatec Eon - Page 7

Eon™ Connectors
Eon
™
at a Glance
1
This guide describes Eon™ controller with temperature control (3rd generation) and
Eon™ software version 3.0.9.
7
Chapter 1 Eon™ at a Glance
Type K Thermocouple
Inputs
Measures temperature
using thermocouples.
BNC Sensor Inputs
Connects to sensor
head via external
oscillator.
Heater and RTD Input/Output
Controls Tempe™ sensor head.
0-5 VDC & Relay Output
Connects the 0-5 VDC output for
the deposition source, the 24 VDC
Mirage™, and the relay control.
Power Input
Connects to
24 VDC
power input
RS-232
Connects Eon™ to PC.
(Always use the provided
USB-to-RS232 cable).
LED Indicator
Displays status
Eon™ Front
Eon™ Back