USB Configuration (USB settings)
Legacy USB Support
Set up or close the traditional USB device function. The traditional USB is the
old 1.1USB device, and USB keyboard and mouse belong to the traditional
USB. When using USB keyboard and mouse, this option needs to be set to
"Enabled". Options: Enabled, Disabled, Auto.
XHCI Hand-off
This project is used to start the operation system supporting the function of
"XHCI hand-off". Options: Disabled, Enabled.
USB Mass Storage Driver Support
Set up USB large capacity memory support. Options: Disabled, Enabled.
Port 60/64 Emulation
Set up or close the port 60/64 emulation support.Options: Disabled,
Enabled.
CSM Configuration (CSM settings)
CSM Support
Set up or close the CSM function. The full name of CSM is "Compatibility
support Module", that is compatibility support module. Options: Disabled,
Enabled. Set to "Enabled" to support interruptions, traditional Option ROM
and traditional non UEFI systems, such as DOS. If set to "Disabled", these
traditional functions will not be supported, and the system will only support
UEFI.
Option ROM Messages
Specify Option ROM to set display mode. Options:Force BIOS (BIOS mandatory
mode), Keep Current (keep current)
Boot option filter
Under the premise of setting the CSM Support option to "Enabled", it is used
to set the bootable storage device format to UEFI or traditional Legacy mode.
Options：UEFI and Legacy, Legacy only, UEFI only.
PXE Boot Rom
Set up PXE boot ROM to control the execution of UEFI and Legacy PXE
ROM.Options:Disabled,UEFI,Legacy.
战斧 B365M-HD PRO V21/BATTLE-AX B365M-HD PRO V21
50
To Next Page
Loading...
