7
name is player model, and the default password is 123456789. You can modify WiFi
name and its password, and click
Apply
.
2. Turn on the WLAN of the control device, and connect the WiFi hotspot of the player.
If the connection is successful, and the control device can search the player, then it means
the control device and the player is connected to the same local area network.
Way 3: The player connects to a router or a computer via an Ethernet cable
1. Select
LAN
, and select
Automatically Obtain IP address
.
2. Click
Apply
>
Test Network State
.
3. If the player connects to a router, click Connect; if the player connects to a computer,
select LAN and enter the IP address of the player, and click Connect.
If a prompt of “The connection is successful” appears, it means the player has networked.
Way 4: The player connects to the network via a 4G module
Prerequisite: The player has installed a 4G module (optional) and a SIM card, and has
connected to a 4G antenna (Note: Don’t place the 4G antenna in a cabinet).
Select
4G
, click
Apply
>
Test Network State
>
Connect
.
If a prompt of “The connection is successful” appears, it means the player has networked.
You can use a USB drive for plug and play content, or publish programs to a player with a
control device. This chapter takes PlayerMaster as an example to explain how to edit and
publish programs to a player.
1. Click
Program
in the navigation bar of PlayerMaster.
2. Click
Add
in the upper-left corner of the “Program” page, and enter the name and
resolution of a new program.
Program resolution is generally equal to screen resolution.
3. In the “Program Editor” window, click the add icon in the toolbar at the top of the
window, and add a window.
Multiple windows in the same page will be played simultaneously.
Window type description
Display an added video, picture, Gif file, Text file, RTF file or Office
file （Word, Excel, PPT files）
To Next Page
Loading...