To Next PageTo Next PageWhat to do if Columbia 28" engine runs erratically?
If your Columbia Snowmobiles engine runs erratically, try these steps: Move the choke lever to the RUN position. Ensure the fuel line is clean and the tank is filled with fresh gasoline. Also, drain the fuel tank and refill it with fresh fuel in case there's water or dirt in the system.
What to do if Columbia Snowmobiles fails to discharge snow?
If your Columbia Snowmobiles fails to discharge snow, immediately stop the engine and disconnect the spark plug wire. Clean the chute assembly and the inside of the auger housing using a clean-out tool or a stick. Also, remove any foreign object lodged in the auger with a clean-out tool or a stick. Finally, replace any sheared shear pins.
Manual for operating 28", 30", 33", and 45" two-stage snowthrower models.
Explains the meaning of various safety symbols found on the snowthrower and in the manual.
Covers essential training, area preparation, and general safety practices before operating the snowthrower.
Provides guidelines for safe refueling and handling of gasoline to prevent fire and explosion hazards.
Details crucial safety instructions for operating the snowthrower, including hand/foot placement and environmental hazards.
Instructions for assembling the handle and attaching the chute crank.
Steps to attach the chute assembly and connect the shift rod for gear selection.
Procedures for making final adjustments and testing controls like drive, shift, and auger.
Adjusting skid shoes, checking tire pressure, and testing auger control.
Identification and basic function of key controls like shift lever, choke, throttle, and auger control.
How to engage drive/augers, control chute direction, and use the clean-out tool.
Steps for starting the engine using recoil or electric starter, including fuel and oil fill-up.
Procedures for safely stopping the engine and general tips for efficient operation.
Procedures to adjust the shift rod and drive control for proper speed and engagement.
Adjusting skid shoes for terrain and the chute bracket for engagement.
Guidelines for lubricating moving parts and maintaining wheels for longevity.
Procedures for maintaining the auger shaft, shear pins, shave plate, and skid shoes.
Covers replacement of auger/drive belts and friction wheel rubber.
Manual for operating 28", 30", 33", and 45" two-stage snowthrower models.
Explains the meaning of various safety symbols found on the snowthrower and in the manual.
Covers essential training, area preparation, and general safety practices before operating the snowthrower.
Provides guidelines for safe refueling and handling of gasoline to prevent fire and explosion hazards.
Details crucial safety instructions for operating the snowthrower, including hand/foot placement and environmental hazards.
Instructions for assembling the handle and attaching the chute crank.
Steps to attach the chute assembly and connect the shift rod for gear selection.
Procedures for making final adjustments and testing controls like drive, shift, and auger.
Adjusting skid shoes, checking tire pressure, and testing auger control.
Identification and basic function of key controls like shift lever, choke, throttle, and auger control.
How to engage drive/augers, control chute direction, and use the clean-out tool.
Steps for starting the engine using recoil or electric starter, including fuel and oil fill-up.
Procedures for safely stopping the engine and general tips for efficient operation.
Procedures to adjust the shift rod and drive control for proper speed and engagement.
Adjusting skid shoes for terrain and the chute bracket for engagement.
Guidelines for lubricating moving parts and maintaining wheels for longevity.
Procedures for maintaining the auger shaft, shear pins, shave plate, and skid shoes.
Covers replacement of auger/drive belts and friction wheel rubber.
General| Brand | Columbia |
|---|---|
| Model | 28" |
| Category | Snowmobiles |
| Language | English |
