4
Section 1 - Opening the Stroller
Section 2 - Front Wheels Assembly
Section 3 - Rear Wheels Assembly
Slide a front wheel assembly (C) into the front frame leg (D)
until it locks into place with an audible click. Repeat for other
side.
Lift and shake the stroller to make sure it is locked completely.
WARNING
Install the rear wheels (E) on the rear axle assembly(F).
Make sure each wheel locks into position with an
audible click. Pull the rear wheels to make sure they are
locked securely.
F
E
Unlock the fold latch (A) while pulling upward on the parent’s
handle (B) until the stroller opens fully with an audible click.
Make sure the stroller locks in an open position.
To Next Page
