EasyManua.ls Logo

Comen STAR 5000 - Page 9

Default Icon
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Printing
7
Real-time Printing
Real-time printing means the printing triggered by pressing the print key on the front
panel during real-time monitoring.
How to print fetal waveform during real-time monitoring:
1.During real-time monitoring, press the print key on the front panel and enter the
[Patient Info & Fischer Grade] window;
2.Confirm the patient information and score results and select [Confirm]. The
monitor starts to print the fetal waveform according to the speed set in [Real Speed]
and the time set in [Real Time].
3.To stop printing during printing process, just press the print key on the front panel
or select the [Print] on-screen key. If [Report] is set to [ON], the monitor will output
the score report immediately and then stop printing; if [Report] is set to [OFF], the
monitor will stop printing immediately.
How to print the fetal waveform under frozen waveform status:
1. Under frozen waveform status, press the print key on the front panel and enter the
[Patient Info & Fischer Grade] window;
2. Confirm the patient information and score results and select [Confirm]. The
monitor will start to print the frozen fetal waveform from the very left waveform on
current screen according to the time length set in [Freeze Time].
3. If the [Report] is set to [ON], the score report will be printed after frozen fetal
waveform.
Stored Patient Case Printing:
Stored patient case printing means the printing
triggered by pressing the print key on the front
panel and enter patient case review interface.
How to print stored patient case:
1. Access [Case List] window; select a certain
patient case and enter [Patient Review]
window;
2. Select [Load] and enter the patient case
review window;
3. Press the print key on the front panel or
select the [Print] on-screen key and enter the
[Patient Info & Fischer Grade] window;
4. Confirm the patient information and score
results and select [Confirm]. The monitor will
start to print the fetal waveform from the very
left waveform on current screen according to
the time length set in [Freeze Time].

Related product manuals