To Next PageTo Next Page
Need help?Do you have a question about the COMENDA GE605 rcd and is the answer not in the manual?
General| Brand | COMENDA |
|---|---|
| Model | GE605 rcd |
| Category | Dishwasher |
| Language | English |
Emphasizes reading instructions, checking equipment, proper use by trained personnel, temperature limits, IP rating, and control panel access.
Covers verifying model data, qualified installation, and compliance with EEC directives and noise levels.
Identifies main switch, pilot lamps (check, cycle, ready), buttons, cycle selector, and thermometers.
Covers pre-wash checks, starting the cycle, adding detergent, and loading dishware.
Details selecting wash cycles (short, medium, long, intensive) and starting the cycle with S3 button.
Covers unloading, draining, self-cleaning, deactivating the machine, and safety notes regarding rinse temperature.
Advises on hand safety, door operation, detergent use, handling malfunctions, thermostat settings, temperature checks, water changes, and post-wash treatment.
Explains alarms for disconnected or faulty temperature probes (tank/boiler) and over-temperature conditions.
Details maintenance, cleaning nozzles, avoiding corrosive products, and managing water hardness deposits.
Lists checks for optimal washing: clean nozzles, correct temperature, detergent, filter, and rack placement.
Provides guidance for temporary non-use, sanitizing the machine weekly, and managing hard water conditions.
Specifies connecting to a suitable magneto-thermal switch based on voltage, model, and power requirements.
Details requirements for effective grounding, equipotential system, water cock connection, pressure, hardness, and temperature.
Explains steam feeding pressure and quality, and water drain connection requirements including pipe material and slope.
Guides on safe loading/unloading procedures and machine dismantling at the end of its lifecycle.
