INSTRUCTIONS FOR TECHNICAL PERSONNEL
45
5)DETERGENT DOSAGE (for machines with built-in detergent dispenser)
With the screw on the side of the detergent pump, close completely the
product intake, then slowly open the screw until the desired intake quantity has
been reached. The correct quantity is indicated by the detergent supplier.
Check that the intake of the pipe during the rinse cycle is as preset. (8cm = 1g
approximately). Maximum intake or delivery distance: 2 meters.
ENERGY CONSUMPTION
Model
capacity
(l)
Rinse
water
consumpt.
(l)
Tank
heater
(W)
Booster
heater
(W)
Wash
pump
(W)
Total
electric
load
(W)
Output in racks
per hour with
55°C inlet
water
Output in
racks per
hour with
12°C inlet
water
LP360 25 3.5 3000 4200 750 4800 40/30/20 10
LC380 42 3.5 3000 6000 1500 10500 48/30/20 10
In the event of low water supply temperature, there will be a subsequent
machine output drop.
To Next Page
Loading...
Need help?
General
