Comet K 250 Extra - High-Pressure Cleaner Technical Specifications

20
EN
WARNING
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Read and keep in mind that indicated in the
INSTRUCTION MANUAL  SAFETY WARNINGS.
TECHNICAL CHARACTERISTICS AND SPECIFICATIONS
10.150 12.130 11.160 13.190 15.170 11.210
ELECTRICAL CONNECTIONS
Power supply (*) 230 V - 1~ - 50 Hz 400 V - 3~ - 50 Hz
Input 2,9 kW 3,3 kW (**) 5,0kW
Fuse 16 A
HYDRAULIC CONNECTION
Maximum water supply temperature 60 °C - 140 °F
Minimum water supply temperature 5 °C - 41 °F
Minimum water supply ow rate 750 l/h
198 US gph
900 l/h
238 US gph
820 l/h
217 US gph
970 l/h
256 US gph
1120 l/h
296 US gph
820 l/h
217 US gph
Maximum water supply pressure 0,8 MPa - 8 bar - 116 psi
Maximum priming depth 1,5 m - 4,9 ft
PERFORMANCES
Max. ow rate 10 l/min
600 l/h
159 US gph
12 l/min
720 l/h
190 US gph
11 l/min
660 l/h
174 US gph
13 l/min
780 l/h
206 US gph
15 l/min
900 l/h
238 US gph
11 l/min
660 l/h
174 US gph
Maximum pressure 15 MPa
150 bar
2176 psi
13 MPa
130 bar
1885 psi
16 MPa
160 bar
2321 psi
19 MPa
190 bar
2756 psi
17 MPa
170 bar
2466 psi
21 MPa
210 bar
3046 psi
Reaction force on the gun 28,9 N 32,2 N 32,8 N 42,2 N 46,1 N 37,6 N
Sound pressure level - Uncertainty (***) 73,2 dB(A) - 0,8 dB(A)
Sound power level 84 dB(A)
Operator arm-hand system vibration -
Uncertainty(***) 2,25 m/s² - 0,24 m/s²
WEIGHT AND DIMENSIONS
Length x Width x Height 520 x 430 x 930 mm - (20,5 x 16,9 x 36,6 in)
Weight
Classic model
Extra model
40 kg - 88 lb
50 kg - 110 lb
(*) The cable supplied with the three-phase versions does not have a plug tted; to assemble this component please
contact a qualIFIEd ElEctrIcIan (see the InstructIon Manual - saFEty rEcoMMEndatIons).
(**) This model can only be used where electrical installations have an installed power higher than 3.5 kW.
(***) Measurements taken in compliance with EN 60335-2-79
The characteristics and specications are guidelines only. The manufacturer reserves the right to make all modications to
the equipment deemed necessary.