22
5.5. Manual handling
Danger due to lifting and carrying heavy loads!
Manual handling of the loads (lifting, pushing, and carrying) has to be avoided.
Unit weight: see "Technical specifications"
Use only suitable means of transport (e.g. industrial truck, lift truck or sack
truck).
5.6. Handling with industrial truck
Danger of injury due to tipping or falling loads!
Bruises. Bone fracture.
When Handling with industrial truck, observe the following basic rules:
Wear the personal protective gear (e.g. protective footwear, protective gloves).
Do not walk or stand under a suspended load.
Use only suitable means of transport (e.g. industrial truck or lift truck).
Use only industrial trucks with sufficient capacity for loading (unit weight: see
"Technical specifications").
Secure the unit so that it cannot tip or fall.
For in-house transport lift the unit and transport it by means of suitable industrial truck or lift truck.
5.7. Storing the unit
These storage conditions apply to the following cases:
To new units.
To units that are already in operation and were prepared for a temporary placing out of
operation, see "Temporary placing out of operation"
Store the units under the following conditions:
Indoors.
Dry.
Dust-free.
Low vibration.
Protected against direct sunlight.
Protected against any aggressive medium.
Storage temperature and relative humidity: see "Technical specifications".
In the case of storing the units for longer than 3 months, the general condition of all parts
and the packing have to be checked regularly.
The packaging has only to be removed just before installation takes place.
To Next Page
Loading...