EasyManua.ls Logo

Comeup CP-750T - Oil Replacement

Comeup CP-750T
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Wire Rope Selections
Oil Replacement
Gear lubrication is an important component in insuring the long life of your winch. Winch
are pre-lubricated at the factory and do not require initial lubrication. Re-lubrication interval
depends upon service, 250 working hours of a year, or after repair or disassembly. The lubricant
for gear box was recommended by Castrol Alpha Spheerol L-EP 2 or HT-740-0 grease, or
Castrol Alpha Series, SP-220/460 oil recommended.
Remarks: The recommended wire rope means standard version on delivery. Other size wire
rope shall carefully consider the safety factor and D/d ratio for rope...
Winch Model
Lifting
Capacity
at 50Hz kg
Recommended Wire Rope
Dia.
mm
Length
( m )
Const.
Minimum
Breaking
Strength kg
Safety
Factor at
50Hz
CP-200 200 6 30 6 x 19 2,010 10
CP-250 250 6 30 6 x 19 2,010 8
CP-300 300 6 30 6 x 19 2,010 6.7
CP-500/500T 500 7 60 6 x 19 2,700 5.4
CP-750T 750 9 60 6 x 24 3,750 5
CP-900T 900 10 30 6 x 24 4,640 5.1
CWG-10077 300 6 60 6 x 19 2,010 6.7
CWG-10151 400 9 60 6 x 24 3,750 9.3
CWG-30075 300 6 30 6 x 19 2,010 6.7
CWG-30151 500 9 60 6 x 24 3,750 7.5
CWG-30375 900 10 60 6 x 24 4,640 5.1
CWG-30565 1,100 12 100 6 x 24 6,680 6
CWG-30750 2,200 16 100 6 x 24 11,900 5.4
CWG-31500 3,500 18 150 6 x 24 15,000 4.2
CWG-34000 5,000 22.4 200 6 x 24 23,300 4.6
Model
CP-
200 250 300 500 500T 750T 900T CWG-30075
Lubricant
L-EP2 L-EP2 L-EP2 L-EP2 L-EP2 HT-740-0 HT-740-0 L-EP2
Q’ty
0.5 lt 0.5 lt 0.5 lt 0.5 lt 0.5 lt 0.74 lt 0.74 lt 0.5 lt
Model
CWG-
10077 10151 30151 30375 30565 30750 31500 34000
Lubricant
L-EP2 HT-
740-0 HT-740-0 HT-740-0 HT-740-0 HT-740-0 SP-460 SP-460
Q’ty
0.74 lt 0.74 lt 0.74 lt 1.36 lt 2.27 lt 3.41 lt 3.14 lt 3.14 lt

Related product manuals