11
CLEANING AND MAINTENANCE
Always unplug the kettle and allow it to cool completely before cleaning.
• Wipe the exterior of the kettle with a damp cloth, taking care to avoid the electrical
components.
• Clean the interior of the kettle with a soft sponge and warm, soapy water. If your hand
does not fit in the lid opening, swish warm, soapy water around inside of the kettle with
the lid closed.
• Rinse any remaining soapy water from the kettle.
• Drain.
• Never attempt to disassemble the kettle or the power base.
• Always take care not to allow electrical components to come into contact with water.
• Do not use abrasive cleaners or scouring pads of any kind on the kettle or power base.
This will cause damage to the finish and may create a risk of electrical shock.
• Please follow instructions and caution statements for cleaning and user-maintenance,
any other servicing should be performed by an authorized service representative.
NOTE
CAUTION
Always unplug the kettle and allow it to cool completely before cleaning.
Never immerse the kettle, power cord, plug or power base in water.
To Next Page
Loading...
