EasyManua.ls Logo

Comfee CKE17L1HBPH - Page 7

Comfee CKE17L1HBPH
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Use distilled water when possible for best taste and to minimize mineral build-up in the
kettle.
Lifting the kettle in the middle of heating cancels the process.
If the kettle is heated with no water, the internal safety mechanism will automatically
turn the kettle o.
During the heating process, the temperature setting can still be adjusted as long as the
temperature setting has not been reached.
NOTE
CAUTION
Never fill kettle with any liquid other than water.
Never open the lid while water is boiling.
To avoid boiling water spilling out; never exceed the MAX line when filling.
7. The digital control panel will display the water's increasing temperature as it heats.
8. Once the water reaches the set temperature, the kettle will beep three times signifying
the end of the cycle.
9. If Keep Warm ( ) mode was not selected at the beginning of the cycle, the kettle will
enter standby mode.
10. Using the handle, lift the kettle o the power base to serve. Do not touch the stainless
steel kettle Body as it will be hot.
11. When finished serving, pour out any remaining water and unplug the power cord.
1. Place power base on a sturdy, level, and dry surface.
2. Make sure that the removable filter is properly inserted. See “Removing/Inserting The
Filter” on page 9 for instructions on inserting the filter.
3. Open the lid and fill with water. Water must be filled between the Min and Max levels
inside the kettle.
4. Close the lid securely. The lid will make a light “click” sound when it locks into place.
5. Plug the power cord into a wall outlet and place the kettle onto the power base. The
kettle will beep once and the indicator lights will flash.
6. Using the ( ) button, set the desired temperature. Press ( ) button to initiate the
Keep Warm mode at the end of the heating cycle, then press the ( ) button to start
heating.
7. Once the set temperature is reached, the kettle will beep 3 times and automatically
switch to Keep Warm mode, and hold the water at that temperature for 60 minutes.
8. After 60 minutes of Keep Warm, the kettle will beep twice, and the indicator lights will
shut o. The kettle will automatically shut down and enter standby mode.
USING KEEP WARM TEMPERATURES
OPERATION INSTRUCTIONS

Related product manuals