TURNTABLE INSTALLATION
Cleaning the cooking compartment and putting the turntable in place. For
new installations, make sure all packaging and shipping tape has been
removed from the turntable shaft. Before using the appliance to prepare food
for the first time, you will need to put the turntable in place correctly. You must
clean the cooking compartment and accessories.
Notes：
1. Never use the appliance without the turntable. Make sure that it is
properly engaged. The turntable can turn clockwise or anti-clockwise.
2. Never place the glass tray upside down. The glass tray should never be
restricted.
3. Both glass tray and turntable ring assembly must always be used during
cooking.
4. All food and containers of food are always placed on the glass tray for
cooking.
5. Never restrict the movement of the turntable.
6. If glass tray or turntable ring assembly cracks or breaks, contact your
nearest authorized service center.
How to put the turntable in place:
1. Place the turntable ring assembly ③
into the recess in the cooking com-
partment.
2. Place the glass tray ① on the
turntable ring assembly ③. Fit the
raised, curved lines in the center of the
glass tray bottom between the three
spokes of the shaft. Make sure that the
glass tray ① engages in the turntable
shaft ② in the centre of the cooking
compartment floor. The rollers on the
shaft should fit inside the turntable
bottom ridge.
3
2
1
To Next Page
Loading...
