16
CLEANING AND MAINTENANCE
COVER DISASSEMBLY AND CLEANING
Note: When installing the cover, the flat surface of the cover sealing ring is on the outside.
1. Pull the middle silicone gripper outward to remove the cover
2. Clean the cover and dry it
3. Install the cover back to its original position.
COVER AND SEALING RING INSTALLATION
Note: Complete the installation as shown in the picture, and ensure that all seals on the
cover are installed in place to prevent air leakage during cooking and affect the taste of
the rice.
1. Pay attention to the direction of the cover before installation, and install the parts one
by one in place.
CoverSealing ring
Please disconnect the power supply before cleaning and maintenance
To Next Page
Loading...
