Comfee CRM33S3ABB User Manual

2.4 Changing the light(optional)
Replacement of incandescent lamps
Disconnecting the power supply before carrying out the bulb replacement ,
Hold and remove the light bulb cover.
Dismantle the old bulb by unscrewing it counterclockwise, replace by a new bulb (Max. 15W) by
screwing it clockwise, and make sure it is fixed in the bulb holder tightly.
Reassemble the light cover and re-connect your Fridge to the power supply.
( Above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor )
2.5 Starting
Before initial start, keep the refrigerator stil for half an hour
before connecting it to power supply.
® Before putting any fresh or frozen foods, the refrigerator shall have run
for 2-3 hours, or for above 4 hours in summer when the ambient
temperature is high.
® Spare enough space for convenient opening of the doors and drawers or
<o, statement by the distributor.
( Above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor )
2.6 Energy saving tips
® The appliance should be located in the coolest area of the room, away from heat
producing appliances or heating ducts, and out of the direct sunlight
® Let hot foods cool to room temperature before placing in the appliance. Overloading
the appliance forces the compressor to run longer. Foods that freeze too slowly may
Iose quality, or spoil.
© Be sure to wrap foods properly, and wipe containers dry before placing them in the
appliance. This cuts down on frost build-up inside the appliance.
© Appliance storage bin should not be lined with aluminum foil, wax paper, or paper
toweling. Liners interfere with cold air circulation, making the appliance less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible.

Comfee CRM33S3ABB Specifications

General

Brand	Comfee
Model	CRM33S3ABB
Category	Refrigerator
Language	English