NOTE
Please be sure to use the accessories provided by our company to install this electric
water heater. This electric water heater can not be hung on the support until it has been
confirmed to be firm and reliable. Otherwise, the electric water heater may drop off from
the wall, resulting in damage of the heater, even serious accidents of injury. When
determining the locations of the bolt holes, it shall be ensured that there is a clearance
not less than 0.2m on the right side of the electric heater, to convenient the maintenance
of the heater, if necessary.
7
4. METHODS OF USING
4.1 Operation Of The Unit
NOTE
During normal operation, the inlet valve shall be always kept open.
First, open any one of the outlet valves at the outlet of the water heater, then, open the inlet
valve. The water heater gets filled with water. When water flows out of the outlet pipe it implies
that the heater has been filled fully with water, and the outlet valve can be closed.
Insert the supply plug into the supply socket, the indicator will light up this time.
The thermostat will automatically control the temperature. When the water temperature inside
the heater has reached the set temperature, it will switch off automatically, when the water
temperature falls below the set point the heater will be turned on automatically to restore the
heating.
●
●
●
Basic Functions Of Electric Water Heaters
Key Name
Briefly press the knob
Switching Mode
Power Supply
The actual temperature
display
Connect network
SMART function
Heating completion
indication
Press and hold the knob for
3S in the startup state
Press and hold the knob
for 3S in shutdown state
“ ” Key
“ ” Key
Reservation function
Function Name Digital Display Content
The distribution network indicator
flashes, and it is always on after
successful WiFi connection
When the set temperature is reached,
the lamp is on
This light is on when the reservation
function is selected
The indicator light is always on
To Next Page
Loading...
Need help?
General
