EasyManuals Logo

Comfee MFE510 User Manual

Comfee MFE510
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Installation
Before installing the machine, the location characterized
follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0
5.Keep far away from the heat resources such as coal or gas.
as
Unpacking the washing machine
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Make sure the small triangle
foam is removed with the bottom one together. If not, lay the unit down with side
surface, then remove the small foam from the unit bottom manually.
Please take the following steps to remove the bolts:
1.Loosen 4 bolts with spanner and then remove them.
2.Stop the holes with transport hole plugs.
3.Keep the transport bolts properly for future use.
Remove transport bolts
Stability is important to prevent the product from
wandering!
Make sure that the product should not stand on
the power cord.
Warning!
Packaging material (e.g. Films, Styrofoam) can be
dangerous for children.
There is a risk of suffocation ! Keep all packaging
well away from children.
Warning!
product
you
You must remove the transport bolts from the backside before using the product.
Youll need the transport bolts again if you move the , so make sure
keep them in a safe place.
Warning!
8
INSTALLATION
w
w
W> 20mm
Installation area

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Comfee MFE510 and is the answer not in the manual?

Comfee MFE510 Specifications

General IconGeneral
Door hingeLeft
Drum volume38 L
Control typeButtons, Rotary
Loading typeFront-load
Product colorWhite
Viewing windowYes
Built-in displayNo
Appliance placementFreestanding
Drum capacity5 kg
Cycle time (max)232 min
Residual moisture61 %
Spin-drying classC
Maximum spin speed1000 RPM
Minimum spin speed500 RPM
Noise level (spin)74 dB
Noise level (wash)59 dB
Number of washing programs23
Child lock-
Washing classA
Annual water consumption washing8250 L
Annual energy consumption washing169 kWh
Current10 A
Connected load1950 W
AC input voltage220 - 240 V
AC input frequency50 Hz
Power consumption (off)0.5 W
Power consumption (standby)1 W
Water consumption per cycle46 L
Energy consumption washing per cycle0.81 kWh
Package depth555 mm
Package width650 mm
Package height885 mm
Package weight57000 g
Weight and Dimensions IconWeight and Dimensions
Depth470 mm
Width595 mm
Height850 mm
Weight54000 g
Door diameter300 mm

Related product manuals