5. Freezer setting
When setting the freezer temperature, the temperature will cycle in the following order each time
the setting key is pressed. In the super freeze state, LED1 and LED3 will light up at the same
time,super freeze exists for 24 h, as shown below:
Ambient temperature fault
Fault code
Fault description
LED1, LED6 flash Refrigerator temperature sensor fault
LED1, LED3 flash
Freezer temperature sensor fault
LED1, LED5 flash
Frozen defrosting sensor fault
LED1, LED4 flash
24 -18 -16
6. When the door is opened, the the corresponding chamber lamp are on. There is no door opening
prompt tone and door opening alarm.
7. Fault indication
The following warnings appearing on the display indicate corresponding faults of the refrigerator.
Though the refrigerator may still have cold storage function with the following faults, the user shall
contact a maintenance specialist for maintenance, so as to ensure optimized operation of the
appliance.
Recommended setting: Refrigerated chamber 5 freezing chamber - 18
To Next Page
Loading...
Need help?
General
