Comfier B15BLU - Using the AC Adapter; Care and Maintenance; Accuracy test

1716
6.Care and Maintenance
5.8. Using the AC Adapter
Wash hands after each time measurement.
If one device is used by different patients, wash hands before and after
each use.
a) Do not expose the device to either extreme temperatures, humidity,
dust or direct sunlight.
b) The cuff contains a sensitive air-tight bubble. Handle this cuff carefully
and avoid all types of stress through twisting or buckling.
c) Clean the device with a soft, dry cloth. Do not use gas, thinners or
similar solvents. Spots on the cuff can be removed carefully with a damp
cloth and soapsuds. The cuff with bladder must not be washed in a
dishwasher, clothes washer, or submerged in water.
d) Handle the tube carefully. Do not pull on it. Do not allow the tubing to
kink and keep it away from sharp edges.
e) Do not drop the monitor or treat it roughly in any way. Avoid strong
vibrations.
f) Never open the monitor! This invalidates the manufacturer’s warranty.
g) Batteries and electronic instruments must be disposed of in accordance
with the locally applicable regulations, not with domestic waste.
6.1. Accuracy test
Sensitive measuring devices must be checked for accuracy from time to
time. We recommend a periodical inspection of your unit by an authorized
dealer every 1 year. Please turn to local distributor or the manufacturer.
Note: No power is taken from the batteries while the AC adapter is connected
to the monitor. If electrical power is interrupted,(e.g., by accidental removal of
the AC adapter from the outlet) the monitor must be reset by removing the
plug from the socket and reinserting the AC adapter connection.
You may also operate this monitor using the AC adapter (output 5V DC1A
with Micro connector).
Use only the approved AC adapter to avoid damaging the unit.
a) Ensure that the AC adapter and cable are not damaged.
b) Plug the adapter cable into the AC adapter port on the right side of the
blood pressure monitor.
c) Plug the adapter into your electrical outlet. When the AC adapter is
connected, no battery current is consumed.