Do you have a question about the Comfort Zone CZHV20B and is the answer not in the manual?
User manual for indoor residential and office use only, not for industrial applications.
Basic safety precautions to reduce the risk of electric shock, fire, or injury.
Avoid use in damp environments or near water sources to prevent electric shock.
Do not touch the fan motor while in use, as it can cause burns.
Keep fan away from combustible materials, flammable gases, and heat sources.
Do not use with damaged cords or plugs; ensure adequate electrical systems.
Use the three-prong grounded plug in a matching grounded outlet.
Do not use this product with any solid-state speed control device.
Always operate the fan in the upright position following manual recommendations.
Place the fan in the area of the room that will provide proper fan cooling.
Plug fan directly into a 120 volt A.C., 60 Hz wall outlet with a tight fit.
Use the switch to turn the fan on to the desired speed or to the off position.
Use the supplied knob wrench to loosen and retighten the adjustment screw.
Simple assembly is required to attach the cradle base to the fan body.
Clean grille with a damp cloth; do not use harsh chemicals or immerse in water.
Internal motor bearings are permanently lubricated and require no additional lubrication.
Do not operate if damaged; seek professional repair or service.
Keep original carton for storage; coil and tie the power cord to avoid damage.
Instructions for safely replacing the product's fuse with an identical one.
| Model | CZHV20B |
|---|---|
| Power Source | Electric |
| Power | 120V |
| Fan Speed | 3 Speeds |
| Oscillation | Yes |
| Mounting Type | Floor |
| Tilt Adjustment | Yes |
| Blade Size | 20 inches |
| Color | Black |












Loading...