To Next PageTo Next Page
Need help?Do you have a question about the Comfort Zone CZTFR1 and is the answer not in the manual?
Do not use the fan in damp environments or near water sources to prevent electric shock.
Avoid touching the fan motor during operation to prevent burns from hot surfaces.
Keep fan away from flammable materials and ensure vents are not blocked to prevent fire.
Do not operate the fan with a damaged cord or plug; use an adequate electrical system.
Ensure the polarized plug is fully inserted into a matching, properly grounded outlet.
Do not use this product with any solid-state speed control device.
Always operate the fan in an upright position following all manual instructions.
Place fan for optimal cooling and plug directly into a 120V AC, 60Hz wall outlet.
Use the ON/OFF button to start/stop and the SPEED button for desired fan speed.
Press SWING for oscillation; press TIME to set desired duration for automatic shut-off.
Assemble the base by connecting pieces, passing the wire through, and securing with screws.
Insert AAA batteries and point the remote towards the control panel sensor to operate.
Clean the grille with a damp cloth; the motor is sealed and requires no lubrication.
Store fan in original carton, coil cord, and replace blown fuse with identical type.
Warranted for twelve months from purchase against defects in material and workmanship.
Excludes damage from misuse, installation, or accidents; provides specific legal rights.
General| Brand | Comfort Zone |
|---|---|
| Model | CZTFR1 |
| Category | Fan |
| Language | English |
