W ARN IN G
Installation MUST conform with local building codes or, in the absence of local codes, with the National Electrical Code
NFPA70/ANSI C1-1993 or current edition and Canadian Electrical Code Part1 CSA C.22.1.
The information contained in the manual is intended for use by a qualified service technician familiar with safety
procedures and equipped with the proper tools and test instruments
Installation or repairs made by unqualified persons can result in hazards to you and others.
Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage,
personal injury and/or death.
tOp-dISCHARGE OUtdOOR wItH AHU
tECHNICAL MANUAL
BAH4 SERIES
CONdENSING UNItS
Revision V 2405
Model Numbers:
BAH4-18-15, BAH4-24-15, BAH4-30-15, BAH4-36-15,
BAH4-42-15, BAH4-48-15, BAH4-60-15
To Next Page
Need help?
General
