11
Attaching Straps
Check To Ensure Product Is Secure
1. Insert the two ‘Male Buckles’ into the
two ‘Female Buckles’
2. Feed the strap underneath the mattress
3. Tighten the strap which is located near
the plastic blocker
4. Ensure the plastic blocker is flush and
tight with the mattress
1. Make sure the crib is sturdy by pulling on the crib away from the bed
2. If it is loose, check to make sure that the crib is in ‘Sturdy Mode’ and that
the strap is tight from the plastic blocker all the way to the clips
To Next Page
Loading...
