Comica CVM-VM30 - Wireless Mode; Re-pairing Wireless Connection

Unpaired (Re-pairing is required when the connection fails. Please follow the method below)
1. Keep the transmitter and receiver within 1m range, turn on the receiver and switch the transmitter into wireless mode by long-press its RF button;
2. Short-press the transmitter's pairing hole with the equipped pin, making it enter the wireless pairing state. Before pairing, the indicator light flashes blue;
3. When pairing, the wireless icon on the screen turns into a paired icon; when paired, the indicator light keeps blue on.
RF Button
Pairing Hole
Paired
Indicator Light Flashes Blue
Indicator Light Keeps Blue On
1M
10