USER GUIDE
7
Product Safety Precautions
Never operate the COMMAND
LIGHT KNIGHT2 near overhead
high voltage power lines. The
COMMAND LIGHT KNIGHT2 is
manufactured from electrically
conductive materials.
Do not use the COMMAND
LIGHT KNIGHT2 for uses other
than its intended purpose.
Do not move emergency vehicle
with the light extended. Visually
verify that the light is completely nested before moving vehicle.
Do not change light position while people are located within its operating envelope.
There are numerous pinch points that can cause serious bodily injury.
Do not use a high-pressure washer or subject the light to high volumes of water
when cleaning.
Never use the COMMAND LIGHT KNIGHT2 as a lifting device or mobile arm.
Do not use a COMMAND LIGHT KNIGHT2 that has been damaged or is not fully
functional, including non-working indicator lamps.
Never hold any part of the COMMAND LIGHT KNIGHT2with a hand or foot
while it is in motion.
The COMMAND LIGHT KNIGHT2 has numerous pinch points. Keep loose
clothing, hands and feet clear of moving parts.
To Next Page
Loading...
Need help?
General
