KNIGHT
2
6
Product Safety Precautions
[ Never operate the COMMAND LIGHT
KNIGHT
2
near overhead high voltage power
lines. The COMMAND LIGHT KNIGHT
2
is
manufactured from electrically conductive
materials.
[ Do not use the COMMAND LIGHT KNIGHT
2
for uses other than its intended purpose.
[ Do not move emergency vehicle with the light
extended. Visually verify that the light is
completely nested before moving vehicle.
[ Do not change light position while people are located within its operating envelope. There are
numerous pinch points that can cause serious bodily injury.
[ Do not use a high-pressure washer or subject the light to high volumes of water when cleaning.
[ Never use the COMMAND LIGHT KNIGHT
2
as a lifting device or mobile arm.
[ Do not use a COMMAND LIGHT KNIGHT
2
that has been damaged or is not fully functional,
including non-working indicator lamps.
[ Never hold any part of the COMMAND LIGHT KNIGHT
2
with a hand or foot while it is in
motion.
[ The COMMAND LIGHT KNIGHT
2
has numerous pinch points. Keep loose clothing, hands and
feet clear of moving parts.
To Next Page
Loading...
