7.
Installation
2. Installation Method of camera
Note
① Do not install the camera where
it is exposed to Direct sunlight
② Keep cleaning up its lens to
capture good views.
1. Installation Method of camera monitor
Note
① Avoid the range of direct sunlight
② Recommended height is pertinent
from 1450 ~ 1500mm
③ Avoid the installation near magnetic
activity, humid temperatures and gas
8
17
¤ 9ROXPH
< 1. SD card inserted>
< 2. SD card not inserted>
1. If SD card is inserted: Video recording starts at the same time as monitoring.
①
②
③
④
: The camera is changed every set time (CAM1 -> CAM2 -> CCTV1 -> CCTV2 in order)
: Press the icon to change, the current camera will be fixed and monitored.
: Save the video. (it will be recorded repeatedly even if the camera is changed).
: Press the icon to change. Repeat monitoring without saving the video.
2.
If the SD card is not inserted: The monitoring is changed every set time and the image is saved
automatically once.
⑤ :
Click the icon to save the image once more.
(During saving the image, the icon is temporarily changed and displayed.)
To Next Page
Loading...
