8
④ To complete the set, press SELECT button.
(2) SCREEN MODE : to set for screen ratio
①
ZOOM: Zoon in(expansion) image maintaining actual ratio(4:3) is shown.
(full of the screen)
②
4:3: Image of 4:3 ratio without expansion is shown.(This is actual ratio for
camera)
③
WIDE: Full of the screen. Not actual ratio (4:3). Image is expanded
according to LCD (WIDE LCD) ratio.
How to adjust
①
Access to SCREEN MODE with ▵/▿ button in UTILITY Menu
②
Press SELECT button to enter the menu.
③
Adjust screen ratio value with▵/▿ button.
④
To complete the set, press SELECT button.
(3) EXIT : Go back to Setting menu
4-3. INFORMATION (The function to check Model name & Version)
In order to check the product information, press menu button and move to
INFORMATION menu with ▵
/▿ button.
(1) MODEL : You can check the model name.
(2) VERSION : You can check the model version.
(3) VIDEO : You can check the video transmission formats(NTSC/PAL)
(4) SOURCE :
You can check the position of camera(DOOR1 / DOOR2) which is shown on
the screen for now.
4-5. RESET : Initializing
Keep pushing interphone and door open button for 3 seconds(Screen setting and
Call volume will be initialized)
Caution
If initialization is activated, all data including screen setting will be
initialized) (Screen setting and Call volume)
4-4. EXIT(Finish setting menu)
To Next Page
Loading...
