24
The Motion detection can be applied only
CAMERA 1
CAMERA_1
The Motion detection can be applied only
CAMERA 2
CAMERA_2
The Motion detection can be applied only
CCTV 1
CCTV_2
The Motion detection can be applied only
CCTV 2
CCTV_2
Icon Description Function
Icons and description
The motion detection is not in use.
MOTION inactive
(14) MOTION setting & MOTION sensitivity setting.
This is the function to set or adjust the MOTION sensitivity, or to activate the Motion
feature of the Lobby camera & of the CCTV camera.
(Note, Only a selected camera out of the cameras installed can use the Motion
feature)
•When It connects with only DRC-40KA, then The Motion detection of the Lobby can
be used.
•If it connects with other cameras except DRC-40KA, It causes the problem such as
howling.
•If you use the front door camera with motion detection audio is not supported.
To Next Page
Loading...
