32PARTICULAR CASE
CERTAIN CASES -
INTERNAL ROUTING
If your frame has internal routing through the head tube (META AM V3 &
META SX V3 for example) we recommend that you regularly inspect your
fork steerer tube when removing it from the head tube. Indeed, the cable
passing through the entrance into the tube can often cause friction against
the steerer tube and can cause long-term damage.
We urge you to cover this area with a thick adhesive protection. A good
template is necessary to cut the adhesive (g. 26) and is available from
customer service.
If you are unsure of how to check and protect your steerer, do not hesitate
to contact our customer service dept.customerservice@commencal.com.
32
fig.26
To Next Page
Loading...
