Commodore Amiga - Page 104

TV Modulator Connector
WARNING: Pin 7 on the 'IV modulator connector supplies +12 volts of
power. Connect this pin ONLY if power from it is required by the
external device.
Pin Name Description
2 GND GROUND
3
AUDIO LEFT LEFT AUDIO CHANNEL
4 COMP VIDEO COMPOSITE VIDEO OUTPUT
5
GND GROUND
6
7 +12V +12 VOLTS POWER (60 rnA)
8
AUDIO RIGHT
RIGHT AUDIO CHANNEL
Mouse/Game Controller Connectors
There are connectors labeled" 1" and" 2" on the right side of the Amiga. If
you use a mouse to control the Workbench, you must attach it to connector
1 (the connector closest to the front of the Amiga). You can attach game
controllers to either of the connectors. To use a light pen, you must attach
it to connector 1. The following tables describe mouse, game controller,
and light pen connections.
WARNING: Pin 7 on each of these connectors supplies +5 volts of
power. Connect this pin ONLY if power from It is required by the
external device.
Reference 7-15