Commodore PC - Fill

220 MS-DOS User's Reference
u
(F)ill Fill
Purpose: / j
Fills the addresses in the specified range with the values in the
specified list.
Syntax:
Grange list
Comments:
If the range contains more bytes than the number of values in the
list, the list will be used repeatedly until all bytes in the range
are filled.
If the list contains more values than the number of bytes in
the range, the extra values in the list are ignored. If any of the I )
memory in the range is not valid (bad or nonexistent), the error ^""^
will occur in all succeeding locations.
Example:
Using the Fill Suppose you type the following command:
command
F04BAM00 L 100 42 45 52 54 41
Debug would now fill memory locations 04BA:100 through
O4BA:1FF with the bytes specified. The five values would then be
repeated until all the 100H bytes were filled.
u