Commodore RF512C - Initialize; Close;Dcloseidclear

16
INITIALIZE
Fun ct ion This di rect command is a warm sta rt function for
Fo rm at
the drive, Other then warm start, it also can re-
read the current disk's BAM for more reliable
operation,
I is the mnemonic of intialize,
I BA SIC stringS="I[ NITIALl ZE] [drivt"''j''
Syntax Remember, there has no single instruction in BAS IC
for execution,
The drive" default value is 0,
Exampl e: 10 CL OS E 1 : OPEN 1, 8,15 , " 10 "
20 INPUT# 1,N,MS : PRINT N;MS
30 CL OS E 1
CLOSE/DCLOSE/DCLEAR
Fun c ti on These interpreter commands is used to close a
logical file or files,
Format
BA SIC
C LO SE fil e"
BA SIC 7, 0 DC LOSE [# file"] [, U device"]
DC LEAR [D drive"] [ ,u device"]
Synt ax fi l e" is the specific file to be closed,
If no fi le " is specified in DC LO SE, then all open disk
files are closed,
DC LEAR clear a ll open channel on disk drive,
The device " default value is 8,
The drive" default value is 0,
Where the pr ec edi ng letters D and U please refer
to S YNTAX ,
Ex ampl e: '10 For 1 =1 to 10
20 C LO SE I
30 NE XT
REM : close logical file from 1 to 10