Comnet Copper Line CLFEEO Series

To Next Page

INS_CLFE(X)EO(C,U)_REV– 10/27/11 PAGE 1TECH SUPPORT: 1.888.678.9427

INSTALLATION AND OPERATION MANUAL

CLFE(X)EO(C,U) Series

ETHERNET OVER COPPER EXTENDER

WITH PASS-THROUGH POE TO 15 WATTS

The ComNet

™

CopperLine® Ethernet over copper line supports up to sixteen

channels of 10/100Mbps Ethernet with Pass-through PoE over twisted pair cable

(CAT-5, UTP), or over coaxial cable. The single channel units may be powered by a

PoE switch or the included power supply. Four, eight, and sixteen channel units

operate from local power. These units provide the ultimate flexibility for extending

a powered device (PD) over long distance copper. DIP switches are provided for user-

selection of local or remote, 10 or 100Mbps, and 1 pair or 4 pair (UTP) settings.

Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment

operating status. Table 2 on Page 9 describes the LED indicators for each light on

the unit.

The CLFE8EO(C,U) and CLFE16EO(C,U) are 1RU rack mountable units. The

CLFE4EO(C,U) units are interchangeable between stand-alone or card mount

configurations, or may be DIN-rail mounted by the addition of ComNet model

DINBKT1 or DINBKT4 adaptor plate. The CLFE1EO(C,U) units are stand-alone, or

may be DIN-rail mounted by the addition of ComNet model DINBKT4 adaptor. See

Figures A through C on Page 11 for mounting instructions.

This manual serves the following

ComNet Model Numbers:

CLFE1EOC

CLFE4EOC

CLFE8EOC

CLFE16EOC

CLFE1EOU

CLFE4EOU

CLFE8EOU

CLFE16EOU

Main Page

Need help?

Do you have a question about the Comnet Copper Line CLFEEO Series and is the answer not in the manual?

Summary

Product Overview and Model Information

ComNet Model Numbers

Lists specific ComNet model numbers covered by this manual.

Product Description and Features

Explains the CLFE(X)EO(C,U) series Ethernet extenders and their capabilities.

Application Diagrams

Various Application Modes

Illustrates different operational modes including PoE Pass-Through, Non-PoE, and multichannel setups.

Installation Instructions

Data Rate and Wire Pair Configuration

Guides on setting the 10/100Mbps data rate and wire pair DIP switches.

Local;Remote Switch Setup

Instructions for configuring Local/Remote settings on single channel and rack units.

Connecting Power and Verifying Functionality

Details on power connections and verifying unit operation via LEDs.

Product Dimensions and Mounting

Standalone;Surface Mount Dimensions

Provides physical dimensions for small size and ComFit modules.

19-Inch Rack Unit Dimensions

Details the physical dimensions for 19-inch rack mountable units.

Installation Considerations and Safety

Environmental and Airflow Guidelines

Advises on operating ambient temperature and reduced air flow in racks.

Important Safety Warnings

Highlights critical safety precautions, including power supply requirements.