compa FC 350 RAP - User Manual

COMPA TECH S.r.l.
Via Piemonte, 11/15 - 41012 - Carpi (MO) - Italy
Web: www.compasaw.com - E-mail: info@compasaw.com
Tel. (+39) 059 527887 - Fax (+39) 059527889
Istruzioni originali in lingua italiana
04/2016 - Rev.02
Troncatrici per legno, prolati in alluminio e PVC
Cut-off mitre saw for wood, aluminium section bars and PVC
Tronçonneuses a bois, proles en aluminium et PVC
Manuale d’uso e manutenzione
ITALIANO Manuale d’uso ................ 2-19
ENGLISH Operator’s handbook ........ 20-37
FRANÇAIS Mode d’emploi .............. 38-55
FC 300 RAP
FC 350 RAP

Summary

General Safety Guidelines

Installation Safety

Personal Protective Equipment

Safe Operation Practices

Check product compliance with manual specifications before use.

Maintenance Safety

Electrical Hazard Warnings

Avoid touching live parts; electric shock hazard.

Installation Electrical Safety

Noise and Vibration Safety

Residual Risk Awareness

Identifies main risks of machine use; read manual carefully.

Specific Usage Warnings

Read and apply instructions for transport, start-up, use, and maintenance.

Technical Specifications

Intended Machine Use

Machine Feature Details

Lists power supply, frequency, power, RPM, dimensions, and weight.

Usage Safety Rules

Machine is for wood, aluminium, PVC; never use for ferrous materials.

Machine Transport

Installation Guide

Work Area Setup

Electrical Connection Procedures

Verify motor voltage matches mains voltage before connecting.

Adjusting Machine Settings

Machine Operation

Pre-Operation Checks

Cutting Procedure

Step-by-step guide on how to perform cuts using the machine.

Safety Device Functionality

Safety Device Verification

Maintenance Procedures

Blade Maintenance

Wear gauntlets and unplug machine before changing the blade.

Transmission Belt Adjustment

Blade Brake Adjustment

Arm Spring Adjustment

Troubleshooting

Spare Parts Ordering

compa FC 350 RAP Specifications

General

Brand	compa
Model	FC 350 RAP
Category	Saw
Language	English