To Next PageTo Next Page
Need help?Do you have a question about the compa FC 300 RAP and is the answer not in the manual?
General safety warnings that should be read before starting any work on the machine.
Details on warranty terms for Compa products used by professional and non-professional staff.
Important precautions to follow before transporting the product, including weight and lifting information.
Key warnings to consider before installing the product, including electrical connections and earthing.
Mandatory personal protective equipment (PPE) and clothing guidelines for safe operation.
Essential precautions for correct machine operation, including operator training and material handling.
Guidelines for performing maintenance operations safely, including unplugging the machine and using original parts.
Critical warnings regarding live parts, electrical hazards, and mandatory use of residual current devices.
Precautions for connecting the machine to the electrical system, including earth wire connection and cable integrity.
Information on noise and vibration levels and necessary preventive measures for operator well-being.
Identification of main risks associated with machine use, such as sparks, dust, noise, and moving parts.
Crucial warnings for transportation, commissioning, start-up, use, shut-down, and maintenance, emphasizing careful reading and application.
Defines the intended use of the cutting-off machine and warns against dangerous or unintended applications.
Details the electrical specifications, blade parameters, dimensions, and weight of the FC 300 RAP and FC 350 RAP models.
Provides measured sound pressure and sound power levels according to DIN standards.
States there is no risk of transmitted hand-arm vibrations due to the machine's fixed support.
Lists and identifies the main components of the machine and supplied/optional accessories.
Specific safety rules for using the machine, including material compatibility and operator limitations.
Guidance on placing the machine on a suitable, stable, and well-lit surface with adequate clearance.
Instructions for safely connecting the machine to the mains, checking voltage, and grounding.
Details on connecting an independent aspirator or bench with aspirator for dust extraction.
Procedures for adjusting stop rods and the table angle for precise cutting operations.
Instructions on how to fit and position stop rod units for identical piece sizes.
Steps to adjust the cutting head angle for right and left cuts, up to 45 degrees.
Steps to perform before operating the machine, including checking protections, securing the machine, and blade guard function.
Step-by-step guide on how to perform cuts, including starting, stopping, and blade lowering procedures.
Information about the machine's built-in safety features like deadman switch, blade guard locking, and automatic braking.
Detailed instructions for safely removing and installing the cutting blade, including tool torque settings.
Procedure for checking and adjusting the tension of the transmission belts for optimal machine performance.
Steps to adjust the blade's stopping time using the brake lining and keeper gap.
Guidance on adjusting the arm return spring for proper arm movement and to prevent overturning risks.
Identifies possible causes for motor failure and suggests solutions.
Lists potential reasons for slow blade speed and provides corrective actions.
Diagnoses causes of excessive vibration and offers solutions for stabilization.
Instructions for environmentally responsible disposal of machine cuttings and shavings.
Emphasizes the importance of using original spare parts and the manufacturer's disclaimer for non-original parts.
General
