compa FC 350 RAP - Page 21

COMPA TECH S.r.l.
Web: www.compasaw.com - E-mail: info@compasaw.com
Tel. (+39) 059 527887 - Fax (+39) 059527889
Manuale d’uso
Operator’s handbook
Mode d’emploi
- 21 -
INDEX
ABOUT THE MANUFACTURER ............................20
MACHINE IDENTIFICATION .......................... 20
1. GENERAL INFORMATION ON THE MANUAL..22
1.1 Initial safety warnings ........................ 22
1.2 Warranty .......................................... 22
2. GENERAL SAFETY INDICATIONS ............. 23
2.1 Transport warnings ............................ 23
2.2 Installation warnings .......................... 23
2.3 Individual safety guard ....................... 23
2.4 Warnings for proper use of the machine .. 23
2.5 Warnings for proper product maintenance . 24
2.6 Electric safety warnings ...................... 24
2.7 Electric warnings during installation ..... 25
2.8 Safety warnings for noise and vibrations .. 26
2.9 Residual risk ..................................... 26
2.10 Special warnings ............................... 26
3. TECHNICAL INFORMATION ..................... 27
3.1 Use of the machine ........................... 27
3.2 Technical features .............................. 27
3.3 Noise levels ...................................... 27
3.4 Vibrations ......................................... 27
3.5 Description of the machine and
accessories ....................................... 27
3.6 Specic safety rules ........................... 28
4. TRANSPORT ............................................ 28
5. INSTALLATION ........................................ 29
5.1 Positioning ........................................ 29
5.2 Electrical connections ......................... 29
5.3 Suction system connections ................ 29
5.4 Adjustments ..................................... 29
5.4.1 Positioning stop rods ...................... 29
5.4.2 Table angle adjustment .................. 29
6. USE .................................................. 30
6.1 Preliminary checks ............................. 30
6.2 Cutting............................................. 30
7. SAFETY DEVICES ..................................... 31
8. MAINTENANCE ........................................ 32
8.1 Fitting and/or replacing the blade ........ 32
8.2 Adjusting tightness of transmission belts .. 33
8.3 Adjusting blade stopping time ............. 33
8.4 Adjusting the arm return spring ........... 33
9. TROUBLESHOOTING ................................ 34
10. DISPOSAL ........................................... 34
11. DECLARATION OF CONFORMITY ......... 35
12. ELECTRIC DIAGRAMS .......................... 36
13. SPARE PARTS ..................................... 37
FIGURES ............................................. 56