Need help?Do you have a question about the CompAir A250TX and is the answer not in the manual?
Highlights electrical, overpressure, and air ejection hazard zones.
Safety warnings for air ejection and pressure release during start-up.
Steps for performing an emergency shutdown of the dryer.
Owner's responsibilities and requirements before dryer installation.
Safe connection of the dryer's electrical supply.
Prerequisites for first start-up: pipe cleanliness, valve status.
Essential checks before starting the dryer.
Steps for performing an emergency shutdown.
Safety warnings and general considerations for starting the dryer.
Procedures for opening air supply and switching on the dryer.
Steps for dealing with faults, remedy, and restart.
Dewpoint display and error codes for dewpoint-sensing control.
Conditions requiring dryer shutdown and depressurisation.
Step-by-step guide to safely depressurise and shut down.
Steps to depressurise dryer and disconnect power.
General rules and considerations for restarting the dryer.
How to restart dryer when it retains operating pressure.
How to restart dryer when operating pressure is lost.
Essential safety warnings and recommendations for maintenance.
Maintenance tasks and their recommended intervals.
Optional recalibration of dewpoint sensor by manufacturer.
Common fault types and who can remedy them.
Faults, causes, and remedies.
Continuation of faults, causes, and remedies.
Fault codes, causes, and remedies for dewpoint-sensing.
To Next Page
General