CompAir C30 - 15. Oil Temperature Controller Option; 15.1 Controller Safety Regulations; 15.2 Controller Design and Function; 15.3 Controller Maintenance and Care

110
15. Oil temperature controller option
15.1 Safety regulations for the use
of an oil temperature controller
Danger
Please observe the general safety
regulations in the compressor manual
when operating the compressor.
Operation of the oil temperature
controller is fully automatic. Mal-
operation of the oil temperature
controller itself is impossible.
15.2 Design and function
See page 78, fig. 4, for system function
diagram.
With the aid of the oil temperature
controller, the compressor oil circuit is kept
at an optimum service temperature.
The oil temperature controller regulations
the temperature of the oil within the set
temperature limits, and only feeds as much
oil to the cooler as is necessary to achieve
the desired oil temperature.
Figure 39
15.3 Maintenance / care
This system is maintenance-free.
15.4 Troubleshooting
Compressed air temperature too low
Oil temperature controller in the oil line
is defective -> replace it.
TO
COMPRESSOR
FROM
COOLER
(OUTLET)
TO
COOLER
(INLET)
FROM
PRESSURE
VESSEL