EasyManua.ls Logo

CompAir V-Compact Series User Manual

CompAir V-Compact Series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User Manual
V-Compact Series
Stationary Air Compressors
Serial numbers from:-
GB
BR1815BA - 08/2004
V100 EO40/0001
V150 EO41/0001
VL200 EO42/0001
VL300 EO43/0001
VL200D/V100D EO44/0001
VL400D/V300D EO55/0001
VL300D/V150D EO45/0001
V200 EO50/0001
V300 EO51/0001
VL400 EO52/0001
V200D EO54/0001
Question and Answer IconNeed help?

Do you have a question about the CompAir V-Compact Series and is the answer not in the manual?

CompAir V-Compact Series Specifications

General IconGeneral
BrandCompAir
ModelV-Compact Series
CategoryAir Compressor
LanguageEnglish

Summary

Foreword

Safety Procedures

General Safety and Warnings

Covers general safety, warnings, cautions, and notes for compressor operation.

Specific Safety Precautions

Details safety measures for installation, operation, and maintenance procedures.

Fire Precautions

Outlines precautions to take in the event of a fire related to the compressor.

General Description

Compressor Overview and Safety Devices

Describes mechanical aspects and built-in safety features of the compressor.

Instrument Panel and Lubrication System

Details the instrument panel layout and the compressor's lubrication system.

Regulation System

Explains air governor and control panel functions for compressor regulation.

Leading Particulars

Model Designations and Specifications

Defines model prefixes, suffixes, ambient temp, speed, and pressure specs.

Technical Data and Ratings

Lists valve counts, oil capacity, pressures, cooling specs, and motor ratings.

Weight Specifications

Provides detailed weight information for various compressor configurations.

Installation

General Installation Components and Guidelines

Covers supplied equipment, installation guidelines, foundation, and pipework.

Ventilation Requirements

Specifies recommended room sizes and ventilation opening areas for operation.

Installation Procedure

Step-by-step instructions for physically installing the compressor unit.

Operation

Commissioning and Static Checks

Procedures for initial setup, electrical checks, and pre-operation static checks.

Functional Checks and Routine Starting

Steps for functional verification and the process of starting the compressor routinely.

Adjustments and Oil Pressure

Details on adjusting system settings and managing oil pressure.

Maintenance

Routine Maintenance Checks

Covers cleanliness, recording data, pressure settings, leaks, and oil checks.

Maintenance Schedule and Parts

Outlines service intervals (A, B, C, D) and lists required parts for two years.

Specific Maintenance Procedures

Details procedures for the lubrication system and air intake filter.

Fault Finding

Troubleshooting Common Faults

Identifies common issues, their possible causes, and recommended remedies.

Appendix 1

Pressure System Diagrams

Provides diagrams for 1st and 2nd stage pressure systems for regulatory compliance.

Related product manuals