32
Maintenance schedule
W1 Oil change (CompAir - 4000-hour oil)
1)
Valid for normal industrial atmosphere! (In case
of doubt with regard to the oil change intervals,
have oil analyses carried out).
Minimum oil change = 1 x year
1)
Oil change when the CompAir special oil "Blue
Energy" (option) is used,
1st oil change after 5000 h, later in accordance
with oil analyses, however, every two years at
the latest!
W 2 Replacement of oil filter cartridge
Valid for normal industrial atmosphere!
W 3 Replacement of oil fine separator
Valid for normal industrial atmosphere!
W 4 Replacement of air filter cartridge
Valid for normal industrial atmosphere!
W 5 Safety valve / functional test
W 6 V-belt
(visual inspection only)
W 7 Check / retighten connecting terminals in the
switch cabinet / electric motor and check the set-
ting of the "control-power transformer"
W 8 Check / retighten bolted connections
W 9 General maintenance / cleaning
(in the case of a very dirty atmosphere, short-
en the cleaning intervals as required)
W10 Replacement of V-belt / recommendation
(complete kits only)
Servicing and maintenance intervals
These maintenane intervals have to be observed!
After OH
Commis-
1000 2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000
or months
sioning
3 M 6 M 9 M 12 M 15 M 18 M 21 M 24 M 27 M 30 M 33 M 36 M
C-kit ●● ● ●● ●
D-kit ●●●
E-kit ●
V-kit ●
W 1 ●●●
W 2 ●● ● ●● ●
W 3 ●●●
W 4 ●● ● ●● ●
W 5 ● ●●●● ●●● ●●●●●
W 6 ●●●●
W 7 ●●●●
W 8 ●●●●
W 9 ●●●
W10 ●
Service kits
C-kit Spare oil filter cartridge
Spare air filter cartridge
D-kit Spare oil fine separator
E-kit Spare wear parts
V-kit Spare V-belt (recommended)
These intervals are valid for normal industrial atmos-
pheres and operating conditions.
For order numbers, see spare parts list.
8. Servicing and maintenance
To Next Page
Loading...
