Compak F8 OD - 9.6. Refill button; 9.7.1. Fixed press; 9.7.2. Dynamometric press DYN (optional)

15
K06315 | v. 21/07/2015 | Ref. quality process 002/03 | ORIGINAL INSTRUCTIONS
9.6.Rellbutton
Ifyoupressandholddownontherellbutton( ),youcanmanuallyrelltheporta
with the desired amount of ground coffee.
9.7.Press
9.7.1.Fixedpress
Positiontheportalterbelowthetamperandpushuptotampthegroundcoffee
(Fig. 5).
9.7.2.DynamometricpressDYN(optional)
Position the portalter in the fork, regulate the tamp with the desired strength
between 11 Kg minimum until 20 Kg maximum, and push down the lever in the side
topressthecoffeeintheportalter.Thedynamometricpressstrengthisrightwhen
youcanlisten“click”whenthetamperpressesthecoffeeinthepoltalter.