Compak F8 OD - 9. OPERATION; 9.1. General switch

12
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 21/07/2015 | K06315
Beforeplugginginthegrinder,conrmthattheelectricalcongurationfoundonthe
descriptionplaqueonthegrindermatchesthepoweronsite.Onceconrmed,plug
in the grinder and press the 3 position switch ( ) to position I (AUTOMATIC MODE).
9. OPERATION
9.1.Generalswitch
The general switch ( ) has 3 positions of use, AUTOMATIC– OFF – MANUAL.
AUTOMATIC: Electrical functions
OFF: Off
MANUAL: Manual mode. Security system that allows using the grinder in case of
supply plate or keypad failure. By activating MANUAL mode, the grinder starts
grinding until returning to de mode OFF.