Need help?Do you have a question about the Compak E6 OD and is the answer not in the manual?
General| Burr Material | Steel |
|---|---|
| Burr Size | 64 mm |
| Motor Power | 250 W |
| Grind Settings | Stepless |
| Grind Adjustment | Micrometric |
| Hopper Capacity | 1.2 kg |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Dimensions | 635 x 215 x 400 mm |
Essential safety guidelines for operation, liquid handling, and authorized maintenance.
Outlines critical safety warnings for installation personnel and operators, including precautions for use.
Explains how to adjust grind fineness using micrometrical and stepped adjustment systems.
Describes switch positions and introduces operational modes: Automatic, Preselect, Manual.
Details selecting and dispensing doses using Automatic and Preselect modes.
Explains Instant mode for dosing and procedures for pausing/resuming grinding.
Explains the micrometric parallel system and initial steps for adjusting the grind point lock screw.
Details positioning the regulator collar for flat burr and conical burr models.
To Next Page
