Need help?Do you have a question about the Compak K3 TOUCH and is the answer not in the manual?
General| Burr Material | Hardened Steel |
|---|---|
| Hopper Capacity | 300 g |
| Motor Power | 210 W |
| Burr Size | 58 mm |
| Burr Type | Flat |
| Power | 210 W |
| Voltage | 220-240V |
| Frequency | 50/60 Hz |
Details the sound levels emitted by different grinder models.
Outlines the manual's purpose for installation, use, maintenance, and its importance for the grinder's life.
Explains the use of bold words, numbered references, and icons within the manual.
Emphasizes reading the manual before installation and ensuring qualified personnel complete the setup.
Lists critical safety precautions for the operator, such as avoiding bare feet and water contact.
Specifies using a flat, stable surface and outlines minimum workspace dimensions.
Covers matching electrical data, outlet compatibility, power requirements, overload protection, and grounding.
Step-by-step guide on placing the hopper, filling with coffee, and connecting power.
Instructions on adjusting grind fineness using the regulator, noting motor running is recommended.
Details the optional stepped grind adjustment using positions defined by hole and pin points.
Optional system for fixing grind regulation using a regulation break after adjustment.
Explains how to adjust grind time using the timer knob for K3 TOUCH/ADVANCED models.
Describes adjusting the portafilter holder clip height using an Allen key.
Details the 3 positions of the K3 PUSH main power switch: Continuous, Off, and Push Mode.
Explains the 3 positions of the K3 TOUCH main power switch: Continuous, Off, and Time grind.
Details the 2 positions of the K3 TOUCH ADVANCED main power switch: ON and OFF.
Ensures proper function and grind quality by cleaning contact parts periodically.
Instructions for emptying, removing, cleaning with soap, and replacing the bean hopper.
Monthly cleaning process using a special cleaner to remove residues and improve coffee quality.
Method for cleaning the exterior using a dry cloth followed by a damp soapy cloth.
Stresses turning off the power and contacting a technician for jammed grinders.
Highlights the importance of qualified staff for maintenance and the impact of dull burrs.
Detailed procedure for disassembling, cleaning, lubricating, and reassembling the grinding group.
To Next Page
