ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 25/03/2014 | K01070
8
The grinder should be installed on a at, stable surface. The minimum
dimensions of the work space should be as follows:
Model
K3 TOUCH, K3 PUSH,
K3 TOUCH ADVANCED
K3 TOUCH, K3 PUSH,
K3 TOUCH ADVANCED
(MINI HOPPER)
Height
20.27
515
17.31
440
in
mm
Width
7.28
185
7.28
185
in
mm
Depth
15.15
385
15.5
385
in
mm
Before grinder installation, the following should be considered:
The electric power at the location of installation should meet the minimum
NOTE: The grinder should be used in environments with mínimum temperature
of 77-86F and should not be installed in places (such as industrial kitchens) where
cleaning is done with direct water spray cleaning.
To Next Page
Loading...
