Need help?Do you have a question about the Compak K6 SILENZIO and is the answer not in the manual?
General| Motor Power | 300 W |
|---|---|
| Dimensions | 215 x 400 x 635 mm |
| Weight | 11.7 kg |
| Hopper Capacity | 1 kg |
| Noise Level | 63 dB |
| Burr Size | 68 mm |
| Voltage | 220-240 V |
| Material | Aluminum |
Explains terminology, formatting conventions (BOLD), and icons used in the manual for clear understanding.
Defines the intended commercial and small store usage for the coffee grinders.
Presents sound decibel levels and maximum work cycles for different grinder models.
Emphasizes reading manual and using qualified personnel for installation, following safety norms.
Lists precautions for operators, including footwear, handling liquids, and safe disconnection.
Specifies requirements for installation location, including stable surface and workspace dimensions.
Details checks for electrical system, outlet, power, overload protection, and grounding.
Step-by-step guide on assembling the hopper, filling with coffee, and powering on the grinder.
Explains micrometrical and stepped systems for adjusting grind fineness.
Details how to adjust the quantity of coffee dispensed per serving.
Describes the two positions (ON/OFF) of the main power switch.
Instructions for turning the machine on/off, automatic stop, and filling the doser.
Explains how to use the portafilter and tamper for packing coffee.
Provides general advice on periodic cleaning of parts in contact with coffee, safety precautions.
Recommends monthly cleaning of the grind chamber with specific products to remove residues.
Details how to clean the coffee holder and dispenser lid.
Instructions for cleaning the grinder's exterior using dry and damp cloths.
Emphasizes turning off the grinder and contacting service if jammed.
Highlights importance of maintenance for efficiency and describes burr replacement recommendations.
Details the process for maintaining the grinding group, requiring qualified technicians.
Specific steps for positioning and tightening the regulator collar on flat burr models.
Specific steps for positioning and tightening the regulator collar on conical burr models.
To Next Page
